Best Stabilizer for LED TV in India [2021]

Last Updated by

CleverPick is reader-supported. As an Amazon Associate, we earn from qualifying purchases.Learn more

Best Stabilizer for LED TV: V Guard TV Stabilizer Crystal Plus

Top Pick

This V Guard voltage stabilizer, known as Crystal Plus is capable of protecting your TV, set-top box as well as the home theatre system.

The stabilizer achieves quick and optimal voltage correction for protecting the sensitive components of your TV. Some specifications of this stabilizer are detailed below.

Key Specifications

  • TV Size – Up to 47 inches
  • Total Capacity – Up to 3 amps
  • Working Capacity – 90 to 290 V
  • Material – Virgin ABS plastic
  • Output socket – 6 and 16 Amps
  • Display Type – Digital display
  • Warranty – 3 years

Pros

  • Automatically resets after overload tripping
  • Spike protection for sudden surges in turbulent weather
  • Continuous voltage correction without halts
  • Digital micro-controlled operation for greater accuracy
  • Built-in thermal overload and short circuit protection
  • Seven-segment digital display instead of LED indicators

Cons

  • Some users felt that the stabilizer doesn’t work if the voltage drops below a certain level

V Guard is one of the oldest and most trusted names in the industry. This product receives excellent ratings from the users for its effectiveness and lightweight design.

Our expert reviewed articles are fact based, unbiased, and rigorously researched to help you make right buying decisions.

15

Model Analysed

8

Research Hours

300+

Comments Analysed

Voltage fluctuations are a common problem in most urban households. Typically, these sorts of variations can wreak havoc on your electronics.

This is true even refrigerators, microwaves, desktops, and even televisions. Some models have inbuilt protection against thunder and voltage fluctuations. However, it is better to be safe than sorry.

An erratic voltage supply is potent enough to incapacitate your expensive TV and lead to substantial repair costs. Using a voltage regulator or a voltage stabilizer ensures that a steady AC is supplied to your device.

In the following section of this article, we are going to look at the best voltage stabilizers for LED TV.

We have reviewed different kinds that would be best suited to different sizes of LED TVs. Read on to know more about these LED TV stabilizers!

Best Stabilizer for LED TV Compared

Here’s a comparison between top Stabilizer for LED TV:

Product ImageProduct NameFeaturesPrice
V Guard TV Stabilizer Crystal Plus
  • TV Size (inches): 47 inch
  • Working Range (Voltage): 90-290
  • USP: Continuous voltage correction

MONITOR Voltage Stabilizer
  • TV Size (inches): 65 inch
  • Working Range (Voltage): 140-290
  • USP: Lesser heat generation

SYSPRO Commander Voltage STABILIZER
  • TV Size (inches): 42 inch
  • Working Range (Voltage): 170-280
  • USP: Short circuit protection

Everest ECC 100
  • TV Size (inches): 72 inch
  • Working Range (Voltage): 90-290
  • USP: A high ease of installation

Microtek EMT1390 Voltage Stabilizer
  • TV Size (inches): 32 inch
  • Working Range (Voltage): 90-300
  • USP: Automatic operations

Everest ELS 100 Voltage Stabilizer
  • TV Size (inches): 72 inch
  • Working Range (Voltage): 90-290
  • USP: User-friendly display

Simon Voltage Stabilizer
  • TV Size (inches): 42 inch
  • Working Range (Voltage): 165-270
  • USP: Good value for money

Reviews of the Best Stabilizer for LED TV

best overall rating

MONITOR Voltage Stabilizer

Whether it is a smart TV, LED TV, LCD TV, 3D TV, or OLED TV, the Monitor voltage stabilizer can handle any kind of TV model up to 65 inches in size.

Additionally, it can also support a home theatre system, a Blu-ray player, an HD/SD set-top box, or a gaming console.

Key Specifications

  • Total Load – Up to 3 amps
  • Plug Point Type – 5 amps
  • LED TV Support – Up to 65 inches
  • Material – 100% Copper Winding
  • Working Range – 140 – 290 V
  • Warranty – 5 years

Pros

  • Broad voltage spectrum for supporting various appliances
  • Better conductivity and power saving with copper
  • Epoxy coating of the body for longer life
  • Wall or floor mountable
  • Lesser heat generation
  • Secure connectivity and high voltage cutoff

Cons

  • Getting a replacement is a cumbersome process

Operating devices beyond their specified voltage range can be harmful to the PCB (Printed Circuitry Board) and lead to failure.

It can also cause issues like panel burning or other malfunctions. This Monitor stabilizer avoids extensive repair costs related to unreliable voltage supply very effectively.

best overall rating

SYSPRO Commander Voltage STABILIZER

The USP of this Syspro voltage stabilizer is the time delay mechanism.

This mechanism is useful for ensuring your electronics’ longevity, especially your TV, which should not start immediately after a sudden drop or spike in the voltage or power disruption.

Some key specifications of this stabilizer are detailed below.

Key Specifications

  • Voltage Tolerance – 170 to 280 V
  • High Voltage Cut Off – 290 V
  • Low Voltage Cut Off – 160 V
  • Capacity – 2.4 Amps
  • TV Size – Up to 42 inches
  • Warranty – 5 years

Pros

  • Inbuilt surge or overload protection
  • Compatible with generators
  • Smart voltage correction technology for the proper regulation
  • Built-in thermal overload protection to prevent overheating
  • Short circuit protection
  • Intelligent time delay function offered

Cons

  • Received low rating for durability

The stabilizer is packed in a sleek cabinet-like design so that it takes up very little space in installation.

Also, the microcontroller-based technology used in this stabilizer reads the voltage at very accurate levels as opposed to the conventional IC circuitry making it more reliable.

best overall rating

Everest ECC 100

This Everest ECC 100 voltage stabilizer will work towards supplying a steady voltage supply for your TV as well as the connected home theatre system, blu-ray player and set-top box.

The noise-free, intelligent start and time delay technologies make it an excellent product to protect your electronic devices.

Some key specifications are detailed below.

Key Specifications

  • TV Size – Up to 72 inches
  • Total Load Capacity – Up to 2.5 amps
  • Working Range – 90 to 290 V
  • Input Voltage Range – 170 to 270 V
  • Output Voltage Range – 200 to 240 V
  • Watts – 850 W
  • Display Type – LED Indicator
  • Warranty – 5 years
  • Material – ABS plastic

Pros

  • Low and high voltage cutoff mechanisms
  • Use of copper makes it a power-saving transformer
  • Lower heat generation
  • Immediate disconnection in case of sudden surges
  • A high ease of installation
  • Good value for money

Cons

  • Customer service could be better

This Everest voltage stabilizer features a user-friendly LED status indicator that is easy to read and understand for the user. One glance at the unit will let the user know the mode of operation!

best overall rating

Microtek EMT1390 Voltage Stabilizer

This Microtek stabilizer is an adequate protection mechanism for safeguarding your LED or LCD TV up to 32 inches in size as well as a DVD or DTH home theatre system.

The unit provides cut off for exceptionally low or high voltage fluctuations to prevent the electronics from malfunctioning. Some specifications are detailed below.

Key Specifications

  • TV Size – Up to 32 inches
  • Input Voltage Range – 90V to 300V +/- 5V
  • Frequency – 50 Hz
  • Display Type – Digital display
  • Warranty – 2 years
  • Material – ABS Plastic
  • Mounting Type – Floor only

Pros

  • Automatic operations without manual intervention
  • Dynamic stepping up or down of voltage
  • Wide range of operating voltage for compatibility with more devices
  • Advanced seven-segment digital display
  • Accurate readings of input voltage available
  • Good durability

Cons

  • Some users felt that the switch was a bit loose

This voltage stabilizer can be installed as a mainline stabilizer, which completely eliminates the need for installing separate stabilizers for different electronic appliances around the house.

It is an excellent purchase if you witness frequent fluctuations or an erratic power supply.

best overall rating

Everest ELS 100 Voltage Stabilizer

The USP of this Everest voltage stabilizer is the intelligent sensor technology that instantly detects excessive current consumption and immediately disconnects the voltage supply to the device to prevent it from burning out.

Some key specifications are detailed below.

Key Specifications

  • TV Size – Up to 72 inches
  • Total Load Capacity – Up to 1.2 amps
  • Working Range – 90 to 290 V
  • Input Voltage Range – 170 to 270 V
  • Output Voltage Range – 200 to 240 V
  • Display Type – LED Indicator
  • Watts – 1000 W
  • Warranty – 5 years
  • Material – ABS plastic

Pros

  • 40% current saving offered
  • Power saving and space-saving coiled design
  • User-friendly display
  • Uses sophisticated Solid State Circuitry Technology
  • Built-in Thermal Overload Protection
  • Low heat generation with better power factor

Cons

  • Value for money could be better

The advanced IC-based technology protects your expensive devices effectively against voltage fluctuations by outputting a steady and reliable voltage stream.

The micro-controlled operations ensure that the voltage corrections happen quickly. The advanced circuitry is also designed to be stable for a longer duration!

best overall rating

Simon Voltage Stabilizer

This Simon voltage stabilizer is adequate protection against LED or LCD TV. The wide range of voltage tolerance allows one to use this unit with a variety of appliances like refrigerators, desktops, and TVs.

Key Specifications

  • Input Voltage – 165 V to 270 V
  • Indicator Type – LED Indicators
  • Output Voltage – 220 V To 230 V
  • Wattage – 200 W
  • Warranty – 3 years

Pros

  • Primary switching technology
  • Continuous voltage correction without interruptions
  • Three LED indicators for clear user understanding
  • A high ease of installation
  • Good value for money

Cons

  • Cannot be used for microwave

The stabilizer offers useful features for protection against erratic voltage and power supply at a very economical price!

Is a stabilizer required for an LED TV?

The need for a stabilizer depends on the location where the TV is operated. The modern, urban areas usually have a very reliable and stable supply of electricity, eliminating the need for a stabilizer.

Additionally, the current LED TVs are designed to operate with a wide range of input voltages that make it safe for the TV to work in this wide range.

The main problem arises in the rural areas where the voltage level could sometimes drop as low as 90 V. The TV may or may not work adequately in such a scenario.

Therefore, a stabilizer is required for normal operations. Problems could also arise in areas where large factories are situated, which could pull or push voltage into the system erratically and damage your appliances.

It is better to have a voltage stabilizer in place to prevent any irreparable damage to the electronics, which could lead to higher repair costs.

Benefits of a stabilizer of a TV

A standard voltage stabilizer for a TV offers the following protective measures –

  • Spike protection
  • Voltage Overload protection
  • Short circuit protection
  • Thermal overload protection
  • Lower and Higher Cut Off protection

These features ensure that whenever there is an unexpected surge, the internal protection mechanism kicks in. This protection feature automatically shuts off the power supply to the unit to protect it from unwanted consequences.

It is also the case if the TV is powered on when the supply is unreliable, the unit can get permanently damaged.

To prevent any sort of electrical disturbance from disrupting your TV’s functionalities, it is advised that you make use of a stabilizer.

It is a very economically priced appliance that offers many benefits and ensures the longevity of your devices.

FAQs

How do I choose a voltage stabilizer?

Since the primary purpose of the stabilizer is regulation or stabilization of the voltage, it is essential to take a quick peek at the voltage range, amperage, and wattage of the unit before selecting one. These values should be compatible with your TV’s ratings. Additionally, some stabilizers also specify what size of TVs they can work with. If the appliance rating is mentioned in terms of wattage, select a stabilizer keeping a 20% wattage margin for the best results.

How do I know if the stabilizer is working?

There are devices known as voltage regulators available in the market today. If you take a voltage regulator output and connect it to the stabilizer’s input, you should be able to get an accurate read of the voltage. It will take a few seconds for the stabilizer to measure and display the reading if it has a digital display. You can now fluctuate the voltage beyond the working limits to see whether the stabilizer works as expected. These tests can be done at the showroom while purchasing to ensure the correctness of readings and operations.

How to stabilizers work?

The electronic relay of the stabilizer adds more voltage to the step-down transformer on detecting a drop in the voltage (op-amps for detection), and if there is a spike, an alternate mechanism is invoked to buck the voltage via the relay to the permissible limits.

What is inside a stabilizer?

In the older versions of the stabilizers, the components inside the model included switching circuits, comparators, relays, transformers, or autotransformers. In the modern stabilizers, there is a microcontroller or a microprocessor that is used as a central controlling mechanism.

What are the different types of stabilizers available in the market today?

There are broadly two types of stabilizers present in the market today. These are, namely, the normal range and the broad range stabilizers. The normal and broad range adjectives are used for describing the KVA rating of the stabilizer. A normal range stabilizer will have a 200 to 240 V output with an input range of 180 to 270 V (20 to 35 V boost/buck). On the other hand, a broad range stabilizer will have a 190 to 240 V output with an input of 140 to 300 V (50 to 55 V boost/buck).

Summary

Stabilizers are units that act as a safeguard between the electricity supply outlet and your electronic appliance to continuously monitor, regulate, and stabilize the voltage before feeding it to your device.

It is a common belief that modern appliances are capable of handling voltage fluctuations eliminating the need for a stabilizer.

However, the appliance’s internal mechanisms cannot boost or buck voltages to the extent of a stabilizer, and therefore, in case of an extraordinary spike or drop, there could be damages.

We hope that after reading this article, you are now in a better position to select a voltage stabilizer adequately suited for safeguarding your appliances.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.